Grommet Mount Base, 24 inch Pole

• Cast steel grommet mount base that securely mounts to a work surface and houses a two inch diameter pole
• Twenty-four inch long pole with two inch diameter. Made of steel. 
• Powder coat painted pole and grommet mount base
• Pole stop bracket to prevent the pole from sliding completely through the hole
• Molded cap installed on the top of the pole
• Pole includes a top and bottom cut-out hole for easy cable management
• Hardware kit included
• RoHS compliant

Extension Arm, Double Pivot, Flat Panel Monitor Mount, Rotating Clamp

• Cast steel rotating clamp for 2 inch diameter pole
• Rotating stop allows you to stop rotation at 0-180 degree or 360 degree rotation
• Solid steel Flat Panel Monitor Mount and Extension Arm, double pivot (up/down & left/right)
• VESA compliant. Monitor mount will accommodate 75 mm and 100 mm VESA compliant monitors, up to 20 lbs
• Powder coat paint on the clamp and monitor mount
• Hardware kit included
• RoHS compliant

Payment Device Arm, Rotating Clamp

• Cast steel rotating clamp for 2 inch diameter pole
• Rotating stop allows you to stop rotation at 0-180 degree or 360 degree rotation
• Fixed length arm to mount Payment Terminal Stand. Steel construction.
• Cable management
• Powder coat paint on the clamp and arm
• A hardware kit includes three Phillips head screws to mount the Payment Terminal Stand, cable clip and screw and four socket screws to tighten the clamp on the pole
• RoHS compliant

Payment Terminal Mount for VeriFone MX915/925

• Swivels 180 degrees
• Tilts up to 0-90 degrees to help meet ADA compliance
• Compact design
• Cable strain relief
• Open hole for cable management
• No metal on metal contact
• No knobs or levers
• Field adjustable
• Hardware kit included
• RoHS compliant

 Grommet Mount Base, 24 inch Pole

• Grommet Mount Base Dimensions: Height 2 inches, Width 3.5 inches and Depth 3.5 inches
• Pole Dimensions: Height 24 inches, 2 inch diameter 
• Total weight: 5 pounds

Extension Arm, Double Pivot, Flat Panel Monitor Mount, Rotating Clamp

• Extension Arm, Monitor Pivot and Pole Clamp Dimensions: Height 4.53 inches, Width 4.53 inches and Depth 9.69 inches
• Weight: 3 pounds

Payment Device Arm, Rotating Clamp

• Payment Device Arm and Rotating Pole Clamp Dimensions: Height 1.73 inches, Width 4.76 inches and Depth 12.02 inches
• Weight: 2 lbs

Payment Terminal Mount for VeriFone MX915/925

• Open Hole Swivel Base: 4.75 inches in diameter
• Weight: 2 lbs