Call Anytime 1-866-452-1255

You are here: Home Pre Configured TechTowers TechTower - Part Number: 367-4012-05

TechTower - Part Number: 367-4012-05 Bookmark and Share

Desk Clamp Base, 16 Inch Pole, Double Pivot, Flat Panel Monitor Mount, Rotating Clamp

Preconfigured Item $203.00

Desk Clamp Base and 16 inch Pole

• Cast steel grommet attached to desk clamp base that securely mounts a 2 inch diameter pole
• Sixteen inch long pole with 2 inch diameter. Made of steel.
• Powder coat painted pole and desk clamp base
• Adjustment lever
• Pad to protect the worksurface
• Molded cap installed on the top of the pole
• Pole includes a top and bottom cut-out hole for easy cable management
• A hardware kit including four Phillips head screws, lock tight nuts, washers and a set screw to lock the pole in position
• RoHS compliant

Double Pivot, Flat Panel Monitor Mount, Rotating Clamp

• Cast steel rotating clamp for 2 inch diameter pole
• Rotating stop allows you to stop rotation at 0-180 degree or 360 degree rotation
• Steel Flat Panel Monitor Mount, double pivot (up/down and left/right)
• VESA compliant. Monitor mount will accommodate 75 mm and 100 mm VESA compliant monitors, up to 20 lbs
• Powder coat paint on the clamp and monitor mount
• A hardware kit includes four M4 Phillips head screws to mount the Flat Panel Monitor and two socket screws to tighten the clamp on the pole
• RoHS compliant

Desk Clamp Base and 16 inch Pole

• Desk Clamp Base Dimensions: Height 6.75 inches, Width 4.25 inches and Depth 3.5 inches
• Pole Dimensions: Height 16 inches, 2 inch diameter
• Weight:  7 pounds

Double Pivot, Flat Panel Monitor Mount, Rotating Clamp

• Monitor Pivot and Pole Clamp Dimensions:  Height 4.53 inches, Width 4.53 inches and Depth 6.20 inches
• Weight: 3 pounds

Desk Clamp, 16 Inch Pole, Double Pivot, Flat Panel Monitor Mount, Rotating Clamp
  Part No. Description Each
Thumb 367-4005-20 Desk Clamp Base, Includes 16 inch Steel Pole. $134.00
Thumb 367-4008-16 Flat Panel Mount, Double Pivot (up/down & left/right), Rotating Pole Clamp $69.00
Add To Cart